Tension Sets are designed to connect OPGW cables and tensile
poles(or towers). Aluminium Clad Steel rods can protect and provide
cushioning to the OPGW cables. The special design of helical rods
makes ensure that Tension Sets can not cause undue stress to the
OPGW cables, so that the normal lifetime of cable system is
Product name：100KN Grip Strength of Tension Clamp
Place of origin：ChinaPayment: T/T, L/C
Size: Customized size Sample: Available
Structure and Material:
Anchor Shackle: Hot dipped galvanized steel. Anchor Shackle is connected with
fastener clamp on tensile pole (or tower).
Extension Link: Hot dipped galvanized steel. Extension Link is connected Anchor
Shackle and Clevis Thimble and avoid band of Outer Reinforcing Rods
too close to poles. It is sure that the cable has enough winding
Clevis Thimble: Hot galvanized cast steel. Clevis Thimble is plugged in bend of
Outer Reinforcing Rods for protection and connected with Extension
Inner Protection Rods: ----Inner Protection Rods are made of aluminium clad steel rods.
With a layer of particle emery inside, Inner Protection Rods can
increase friction and decrease side pressure to cables. Rods are
made into four subsets which can reduce misalignment errors and
speeds installation. The ends are bent outward to avoid stress to
Outer Reinforcing Rods: Rods are made into one subset with a layer of firm emery inside,
in order to increase gripping power of Outer Reinforcing Rods while
decreasing side pressure. Sets are color marked to reduce
misalignment errors and to speed installation.
Picture of Subassembly for 100KN Grip strength of Tension Clamp:
Application Guide for 100KN Grip strength of Tension Clamp:
1.It is designed to connect Continue pole(or tower) and Terminal
pole(tower), tensile pole(tower). The special specification: one
unit per Terminal pole(tower), two units per tensile pole(tower)
and two units per Continue pole(tower).
2.Select the specification modle corresponding to the cable
diameter range, rated Tensile Strength.
3.Ground Clamps are sold together with Tension Sets, and prohibited
directly installing on the Outer Reinforcing Rods and Inner
Tension Sets for 100KN:
Standards information for 100KN Grip strength of Tension Clamp:
|Inner Protection Rods||Outer Reinforcing Rods||Color Code||Rated Tensile Strength(KN)|
|ANF 1000 100||9.0-10.0||1600||13||1100||6||red||100|
|ANF 1110 100||10.1-11.1||1700|